Eight Steps of Nail Basic Teaching

2021-11-11

I don't want to go to a nail salon. In addition to spending a lot of money, there is also a big risk. I don't know how the effect will be. It is better to do it yourself. It is always safe to say that it is actually very simple!
1. Manicure shape, push finger skin
2. Cut the finger skin and polish the nail surface
Use a sponge file to polish the nail surface. When polishing, the rear edge of the nail and the front part of the nail should be polished neatly. If the nail surface is not smooth, the nail polish is easy to fall off.
3. Clean the nail surface and apply protein binding agent
Clean the nail surface with a special cleaning fluid.
When spreading the protein binders evenly, avoid being too thin or too thick. Then illuminate the phototherapy lamp for 1 minute (LED light for 30 seconds). The protein binder illuminating time should not be less than 1 minute. If it is less than 1 minute, it can not be dried, and it is easy to fall off. It should not exceed one minute. If the lighting time is too long, it will dry the surface glue. The surface glue can enhance the adhesion with the colored nail polish.
4. Apply nail polish glue
Wrap the edging before applying, swipe the brush over the mouth of the bottle cleanly before applying, and then wrap the edging thinly on the front edge of the nail. Spread the nail polish thinly and evenly on the nail surface. The nail polish should be thin and even when applying it. If it is too thick, it will wrinkle.
Light the phototherapy lamp for 2 minutes (LED light for 1 minute), the nail polish must be lighted for 2 minutes in the first pass. If the time is not enough, it will not be completely cured. Layer with the second pass color.
5. Apply nail polish glue a second time
The method of applying the nail polish for the second time is the same as the first time.
6. Apply the first seal coat
Light the phototherapy lamp for 1 minute (LED light for 30 seconds)
7. Apply the second seal layer
Light the phototherapy lamp for 2 minutes (LED light for 1 minute)
8. Clean the surface with cleaning fluid
Wash the surface with a cleaning solution after the seal has been exposed for 2 minutes. Avoid using other cleaning fluids. The poor cleaning effect of other cleaning fluids will affect the gloss of the sealing layer.

In this way, a simple and shiny nail art is complete!

Previous:Can the nail art be restored after the lamp is blacked out?

Next:To make good looking nails at home, you need to prepare these tools

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy

Reject Accept